Basic Specification

Machine color: RAL7035 (or customized according to customer requirements)
Wire diameter range: 0.5-1.5mm;
Die rotation diameter: 500mm;
Diameter before winding: up to 350mm
Turning accuracy: 0.2%;
Number of working heads: 1-4
Transmission distance: 170-300 mm
Array line number: 1-12;
Number of wire supports: 1-12 sets
Working speed (no load): 0-800 (according to different diameter wires, the speed can be steplessly adjusted, no obvious vibration or noise;)
Maximum speed: 1600R.P.M
Machine productivity: about 1000 pieces/8 hours
Power supply/input: 220V / 50Hz
Air source pressure: 0.5-0.8MPa
Power: 0.75KW
Main motor power: 2.2KW-6P;
Frequency converter: 2.2KW;
Effective length of square shaft: 520mm.
Square shaft size: 20 * 20 * 625mm;
Machine size: 1550mm×1250mm×1450mm
Machine weight: about 850 kg

Production Process

This semi-automatic motor coil winding machine is suitable for fan motors, washing machine motors and various small motors, square, round, and multilayer coils.

Machine Features

Automatic slotting, automatic tapping winding, the operator only needs to take out the winding mold and take out the coil.

Equipped with two winding square shaft spindles;

Low vibration and low noise;

The wire is not damaged and the enamel will not be damaged;

The main electrical components and bearings adopt high-quality motor accessories;

Steering parameters, wire diameter, wire width, transmission distance, winding direction and coil arrangement direction can all be set on the machine controller;

Linear array: stepper motor + screw;

A total of 999 model parameters can be set;

The machine will automatically stop after the wire is wound;